TB141 battery

Hi, I’m not sure that the battery charger is working, when I connect up to battery the red light flashes rapidly, the instruction book or your previous posts don’t say anything about flashing lights. Could someone please help.
0

Comments

10 comments
Date Votes
  • Official comment

    Hi Jamie

    Thank you for your comment and we are willing to help.

    Please kindly check the status of the battery's indicator light during charging below :
    1.Red light does not lit: The battery is unconnected.
    2.Red light stays lit: The battery is charging normally.
    3.Red light goes out: The battery is finished charging.
    4.The indicator light does not light when plugging the USB: The battery fails to be charged.

    Besides, we'd like to offer you some advice on battery charging or using:
    1. It is highly recommended to use the original battery and charger when charging. Remember not to charge the battery directly in the RC car. The battery needs to be taken out of the RC car  when charging the battery;
    2.When charging the battery, you should check the charging status frequently. If the battery is deformed or bulged, please stop charging immediately and dispose of the dangerous goods;
    3.Please refer to the instruction manual for charging time. Do not overcharge the battery;
    4.The battery should be charged up to 50% power after use to prevent damage to the battery due to low voltage.

    If you need more help, please kindly contact to our support team:support@bezgar.com 
    Thank you for your time. Have a nice day!

  • The light is flashing, it is not doing any of the above?

    0
  • The support team didnt answer the simple question. Why is that?!
    I also have the blinking red light.
    What does it mean?

    0
  • Hi Jamie and אריאל הרנן ספיורקה

    Thank you for your comment and we are willing to help.

    And please note if the red light keeps flashing when charging, it means abnormal charging.
    We suggest you charge the battery via the laptop USB port. If you want to use a USB converter to charge the battery, the output should not exceed 10W (5V/2A).

    Besides, could you take a failure video of the flashing light to our support team via the support@bezgar.com , so that we can further feedback to the manufacturer and provide you with professional technical support and solutions?

    Please rest assured that I will try my best to figure out your issue. Wish you a good day!

     

    0
  • I also have a red flashing light. Even whilst connected to the USB port on my laptop powerpack. 

    0
  • Hi Bob
    Thank you for your comment, and we are so sorry for the red light you mentioned.
    The red light flashing you mentioned is abnormal, but we also need to figure out the issues according to the red light brightness and flashing frequency.
     
    And please kindly check the status of the battery's indicator light during charging below:
    1. Red light does not light: The battery is unconnected.
    2. Red light stays lit: The battery is charging normally.
    3. The red light goes out: The battery is finished charging.
    4. The indicator light does not light when plugging the USB: The battery fails to be charged.
     
    Could you take a failure video to our support team via email: support@bezgar.com so that we can provide further feedback to the manufacturer and provide you with professional support and solutions?
     
    I am looking forward to receiving the video. Thank you for your time.
    0
  • Any answers on the red flashing light?

    Can a new battery pack be purchased somewhere?

    0
  • Hi Natalie

    Thank you for your comment and the red light flashing means charging abnormally, but we also need to figure out the issues according to the red light brightness and flashing frequency.
     
    And please kindly check the status of the battery's indicator light during charging below:
    1. Red light does not light: The battery is unconnected.
    2. Red light stays lit: The battery is charging normally.
    3. The red light goes out: The battery is finished charging.
    4. The indicator light does not light when plugging the USB: The battery fails to be charged.
     
    Could you take a failure video to our support team via email: support@bezgar.com so that we can provide further feedback to the manufacturer and provide you with professional support and solutions?

    And here is the purchasing link for the battery of the Rc car TB141: https://www.amazon.com/dp/B08Q3J2TXJ
    (The accessory link is only available in the US. If you are from another country, please kindly let us know.)
     
    We are looking forward to receiving the video. Thank you for your time.
    0
  • Mine is also blinking and the instructions they gave you guys is not helpful.

     

    0
  • Hi Ethan
    Thank you for your comment and we are willing to help!

    As for the battery of the Rc car TB141, f the light keeps flashing while charging, it indicates a charging failure, which may be caused by a mismatch in charging voltage.
    We suggest you charge the battery via the laptop USB port. If you want to use a USB converter to charge the battery, the output should not exceed 10W (5V/2A).

    Besides, this may also be caused by damage to the data cable or the internal circuit of the battery. We suggest that you can directly purchase new batteries and data cables for replacement.

    Here is the purchasing link for the data cable and battery of the RC car TB141: https://www.amazon.com/dp/B08Q3J2TXJ

    If you need more help, please kindly contact with our support team via email: support@bezgar.com 
    Thank you for your time and wish you a happy life!










    0

Please sign in to leave a comment.

Didn't find what you were looking for?

New post